CombiSteel 7280.0070, Instruction Manual

Page: 15 / 81

29 28
EN
EN
Failure to use PPE exposes
operators to risks of damage to
their health.
2.6 Protection devices and guards
installed
The machine has fixed protection devices
(side panels, casings, covers, etc.) rigidly
secured and removable or openable only
with utensils or tools.
The electrical equipment doors (fixed or
hinged) can only be opened with utensils
or tools.
The machine must not be
handled with fixed guards
removed, due to the possible
presence of pressurised, hot or
live parts.
Some of the illustrations
below depict the machine
without protection devices or
guards solely for descriptive
requirements. It is absolutely
forbidden to use the machine
without these protection
devices.
2.7 Information regarding use and
maintenance
There are no mechanical, thermal and
electrical risks that have not been
neutralised or safely confined for use.
However, some residual risks arise if specific
measures and precautions are not taken;
these are listed in the following table.
Machine maintenance
operations must be carried out
by specialised technicians with
the obligation to wear personal
safety devices and suitable
equipment.
Electrically and hydraulically
disconnect the machine
whenever it is accessed by
removing panels. Place a sign
on the electric control panel
indicating machine undergoing
maintenance.
Do not open the warewasher
door when in use. Always turn
the warewasher off before
accessing the inside.
Do not lean on or sit on the
open door.
In any case, the warewasher has a special
safety that immediately stops it, limiting
the escape of hot fluids if the door is
accidentally opened.
The sound pressure level of the warewasher
is below 70 dB(A).
3. DESCRIPTION, CHARACTERISTICS
AND INTENDED USE
The warewashers are designed to wash
pots, trays and various types of accessories,
for gastronomy businesses such as cake
shops, butcher’s shops, bakeries, etc.
Any other use without express permission,
or failure to follow the instructions given
in this manual, will not be covered by
warranty.
Items contaminated by petrol
or paints, pieces of steel or iron,
corrosive or alkaline chemicals
and solvents, must not be
washed in the warewasher.
Aluminum pots and accessories
must be washed using chemical
products suitable for that
material.
1 – CE data plate
2 – Control panel
3 – Adjustment foot
4 – Detergent and rinse aid
dosing access panel
5 – Basket support
6 – Lower wash arm
7 – Tank filters
8 – Chimney vent (models without
heat recovery unit)
3.1 Warewasher versions
Control panel with
electromechanical buttons
Electronic control panel
with LCD display
Situation Residual risk
Electrocution Contact with electrical
circuit components
during extraordinary
maintenance when the
main electrical panel was
not disconnected.
Burns
Chemical
risk
Crushing or
shearing
Falling
Tipping over
Contact with hot parts
during maintenance
without gloves and suitable
clothing.
Contact with hot items/
dishes when removing the
load without letting
it cool first.
Contact with internal parts
of the machine if accessed
in an unsafe way.
Contact with detergents,
rinse aids or descaling acids
during cleaning and routine
maintenance.
Contact with moving parts
of the machine during
loading/unloading, if
accessed in an unsafe way.
In case of wet or
dirty floor.
During machine handling
if the load is unbalanced
and/or appropriate
equipment is not used.
1
2
3
6
7
8
5
4