9
www.combisteel.com
14. Thermostat brief instructions
How to check the settings
1. Press the SET button and the settings are displayed on the screen;
2. Press the SET button and it will return to the normal display after 5 seconds
How to modify the parameter value (into the user layer, the first layer)
The operation of modifying the parameter values is as follows:
1. Press the SET+ key for more than 3 seconds to enter the programming state (the "° C" or "° F" LED icon flashes).
2. Select the concerned parameter and press the "SET" key to display parameter value.
3. Use the or keys to modify the parameter value.
4. Press the "SET" key again to confirm and save the new value, then the next parameter name will be displayed.
Exit: Press the SET + keys or wait for 15 seconds without pressing any keys.
Note: The new value will also be saved after 15 seconds without pressing any keys.
