Combilift Ltd.
C4000-C5000XL O&S Manual
3-4
C4000-OM-EN-08
3.4: Parking
When parking the Combilift always ensure that one of the two recommended
parking methods are used to ensure the safety of the operator and others.
There are two recommended methods for parking your Combilift. One is called
the Attended parking method, for cases where the operator needs to exit the
machine but will be no more than 25 feet (7 metres) away. The other is the
Unattended parking method, for cases where the operator must exit the
machine but will be further than 25 feet away
The Attended Parking Procedure
Bring machine to a complete stop.
Once stopped, apply the parking brake and set the directional control
lever to the neutral position.
Lower the forks till they are on the ground and tilt the mast forward.
If loaded, retract the mast and rest the load on the platforms of the
machine.
Leave the engine running
Remove the seatbelt from its retainer and exit the Combilift by using the
three – point contact method
Stay within 25 feet (7 metres) of the machine at all times.
The Unattended Parking method
Bring machine to a complete stop.
Once stopped, apply the parking brake and set the directional control
lever to the neutral position.
Lower the forks till they are on the ground and tilt the mast forward.
If loaded, retract the mast and rest the load on the platforms of the
machine.
Turn off the machine.
Remove the seatbelt from its fastener and exit the Combilift by using the
three – point contact method as discussed earlier.
Chock wheels if on an incline
Turn off LP supply on LP gas machines
https://www.forkliftpdfmanuals.com/