Comba Telecom Inc
. 568
Gibraltar Drive, Milpitas, CA 95035.
Tel: +1 866 802 7961,
Fax: +1 408 526 0181
Information contained in this document is subject to confirmation at time of ordering. Specifications may differ depending on
region and customers’ requirements
Page 2 of 2
DS-Control
1-0-4/0521
Mechanical Drawing and Installation Guide
Installation Instruction
A. The antenna bracket and the antenna frame are pre-assembled for vertical polarization(default)
B. Put the antenna bracket and the mounting pole according to the position and direction shown in the drawing
C. Fasten two U-bolts and clamps the antenna bracket to the mounting pole. (not included)
D. Adjust antenna tilt angle (max ± 30
) and fasten the nut (HEX M6)
E. Connect the equipment and antenna with their respective connectors
F. Ensure that all connections are waterproof
G. Fasten the cables of the antenna and equipment
U-Bolt
Hex nut M6
Antenna Tilt
Adjustment
Antenna frame
Antenna mount
bracket
Mounting
pole
3
0
°
Clamp
U-Bolt
Clamp
Antenna frame
Antenna
mounting
bracket
U-bolts/nuts for pole
mounting
mounting pole
Ø 40-50mm / 1.5-2inches
Antenna Tilt
Adjustment
U-bolt
Clamp
Plain washer
ɸ
6
Spring washer
ɸ
6
Hex Nut M6
Antenna installation for vertical Pol. (default)
33.5 [850]
Unit: inch[mm]
Optional installation - Horizontal Pol.