MULTICONTROL PANEL
69
Comau Robotics Product Instruction
take some seconds.
When the Control Unit is connected, the corresponding “LED”, in the
becomes
green
.
5.2.4 Disconnect
Select the Control Unit to be disconnected and click the
Disconnect
key (figure below).
The operation is performed without any confirmation prompt.
When the Control Unit is disconnected, the corresponding “LED”, in the
becomes
red
.
5.2.5 Teach Pendant
Select the Control Unit involved in the connection with the
Virtual Teach Pendant
.
Click the Teach Pendant command key (highlighted in the figure above on the left).
After a few seconds two windows are opened on the PC, representing respectively the
Virtual Teach Pendant screen
and
keyboard
.
Username
and
Password
must have already been defined on the being connected
Control Unit.
