InteliVision 5 CAN - 1.3.0, Global Guide
27
Use → or ← buttons to go to a certain position of the field and use
or
buttons to change the value.
Then use
button to confirm new value.
Note:
If you set the value out of limit, the field will get red color and the new value is invalid. Invalid value
cannot be confirmed.
4.6.2 String selection
Press the button when the proper setpoints group is chosen (e.g. Basic Settings)
Use arrows
or
to go to a certain set-point (e.g. Mode ID) and press Enter button, see picture below
Use
or
buttons to select the string from the list and press the
button.
4.6.3 String edit
Press the button when the proper setpoints group is chosen (e.g. Basic Settings)
Use arrows
or
to go to a certain set-point (e.g. Engine Name) and press Enter button, see picture
below:
