InteliVision 18Touch 1.0 Global Guide
28
7 Automatic SCADA start and
connecting to the system
To automatically start SCADA and connect to the system, use the following settings in InteliMonitor:
Enable (Check) the functions highlighted in the graphic.
Image 7.1 SCADA automatic start example
When the IV18T boots up, InteliMonitor will automatically start and connect to the predefined site. By enabling
the function Fullscreen mode, InteliMonitor will start in fullscreen mode.
Note:
You can easily secure your fullscreen SCADA by setting a password in the SCADA tab. Another setting
in the same SCADA tab is Touch panel mode which opens the embedded alphanumeric InteliMonitor keyboard.
For further information please see the InteliMonitor manual or help.
