InteliMains 210 Global Guide
45
Image 5.5 Second screen of InteliConfig - select Serial link
Connection using WinScope
Image 5.6 WinScope screen - select direct connection
Note:
Winscope supports only 19200, 38400, 57600 speeds.
5.2.3 Ethernet
It is possible to connect to the controller using ethernet port either directly or using ComAp's AirGate service.
Direct connection
When you use direct connection the controller needs to be reachable directly from the PC you use (i.e. one LAN
or WAN without any firewalls and other points that may not allow the connection). The following settings need to
be checked in the controller:
