ComAp InteliLite MRS16 Manual Download Page 269

Page: 269 / 632

InteliLite Global Guide

269

Setpoint group

Scheduler

Related FW

1.2.1

Range [units]

Including / Skip / Postpone [-]

Default value

Including

Alternative config

Step

[-]

Comm object

Related applications

AMF, MRS

Config level

Standard

Setpoint visibility

Conditioned by the setpoint

Timer 1 Function (page 264)

Description

Behavior of

Timer 1 Function (page 264)

on weekends.

Including

Timer 1 Function (page 264)

counter is running on the weekends and

Timer 1 Function

(page 264)

can be active.

Skip

Timer 1 Function (page 264)

counter is running on the weekends but

Timer 1 Function

(page 264)

isn’t active.

Postpone

Timer 1 Function (page 264)

counter isn’t running on the weekends and

Timer 1 Function

(page 264)

isn’t active. If the activation of timer is counted on the weekend, than timer will

be activated after weekend. Another activation of timer is counted from original date of

first occurrence date.

Timer 1 Weekends

back to List of setpoints

Setpoint group

Scheduler

Related FW

1.2.1

Range [units]

Monday / Tuesday / Wednesday / Thursday / Friday / Saturday/ Sunday[-]

Default value

All OFF

Alternative config

Step

[-]

Comm object

Related applications

AMF, MRS

Config level

Standard

Setpoint visibility

Conditioned by the setpoint

Timer 1 Function (page 264)

Description

Use this setpoint to include or exclude individual days of week. To select the day use Up and Down buttons.

To change the value of day use Enter button.

Timer 1 Day

back to List of setpoints

Summary of Contents for InteliLite MRS16

























































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for InteliLite MRS16

Reviews:

Brands by name

Popular brands

ComAp InteliLite MRS16, Manual

Search results

Summary of Contents for InteliLite MRS16

Reviews:

Brands by name

Popular brands