ComAp InteliLite AMF25, Global Manual

Page: 365 / 735

InteliLite Global Guide
365
Setpoint group
CM-GPRS; CM-4G-
GPS
Related FW 1.9.0
Range [units] 0..31 characters [-]
Default value airgate.comap.cz:9925 Alternative config NO
Step [-]
Comm object 24311 Related applications AMF, MRS
Config level Standard
Setpoint visibility
Only if relevant module is ins conditioned by the setpoint Internet Connection
(page 359)
Description
This setpoint is used for entering the domain name (e.g. smtp.yourprovider.com) or IP address (e.g.
74.125.39.109) or number of port (with colon like a first mark) of the SMTP server. Ask your internet provider
or IT manager for this information.
Note: You may use also any public SMTP server which does not require connection over SSL/TLS
channels. If the device is connected to AirGate the AirGate SMTP server at "airgate.comap.cz" may be
used. Ports 25 and 9925 are supported. After controller connects to AirGate for the first time (or with new
public IP address), it may not be able to send emails for first 5-10 minutes.
SMTP Server Address
6
back to List of setpoints
Setpoint group
CM-GPRS; CM-4G-
GPS
Related FW 1.9.0
Range [units] 0..31 characters [-]
Default value [-] Alternative config NO
Step [-]
Comm object 24310 Related applications AMF, MRS
Config level Standard
Setpoint visibility
Only if relevant module is ins conditioned by the setpoint Internet Connection
(page 359) (CM-GPRS module)
Description
Enter an existing email address into this setpoint. This address will be used as sender address in active e-
mails that will be sent from the controller.
Note: It is not needed to enter an existing email address, nevertheless valid email format needs to be
followed.
IMPORTANT: This item is obligatory when emails are configured.
SMTP Sender Address
6
back to List of setpoints