ComAp InteliLite 4 AMF 20, Global Manual

Page: 364 / 620

InteliLite4 AMF20 Global Guide
364
Subgroup: E-mail Settings
SMTP Server Address
Setpoint group CM-Ethernet Related FW 1.3.0
Range [units] 0 .. 31 characters [-]
Default value global.airgate.link:9925 Alternative config NO
Step [-]
Comm object 23942 Related applications AMF, MRS
Config level Standard
Setpoint visibility Only if relevant module is installed
Description
This setpoint is used for entering the domain name (e.g. smtp.yourprovider.com) or IP address (e.g.
74.125.39.109) or number of port (with colon like a first mark) of the SMTP server. Ask your internet
provider or IT manager for this information.
Note: You may use also any public SMTP server which does not require connection over SSL/TLS
channels. If the device is connected to AirGate the AirGate SMTP server at "global.airgate.link" may
be used. Ports 25 and 9925 are supported. After controller connects to AirGate for the first time (or with
new public IP address), it may not be able to send emails for first 5-10 minutes.
6
back to List of setpoints
SMTP Sender Address
Setpoint group CM-Ethernet Related FW 1.3.0
Range [units] 0 .. 31 characters [-]
Default value [-] Alternative config NO
Step [-]
Comm object 23944 Related applications AMF, MRS
Config level Standard
Setpoint visibility Only if relevant module is installed
Description
Enter an existing email address into this setpoint. This address will be used as sender address in active e-
mails that will be sent from the controller.
Note: It is not needed to enter an existing email address, nevertheless valid email format needs to be
followed.
IMPORTANT: This item is obligatory when emails are configured.
6
back to List of setpoints