ComAp InteliLite 4 AMF 20, Global Manual

Page: 198 / 620

7 Technical data
Power supply range 8-36 VDC
Power consumption
(without modules)
3.5 W
RTC battery
Replaceable (3 V)
Fusing power 4 A w/o BOUT consumption
E-Stop fusing
10 A
Max. Power Dissipation 9 W
Power supply
Protection degree (front
panel)
IP 65
Operating temperature
-20 ˚C to +70 ˚C
Storage temperature -30 ˚C to +80 ˚C
Operating humidity
95 % non-condensing
(EN 60068-2-30)
Vibration
5-25 Hz, ± 1.6 mm
25-100 Hz, a = 4 g
Shocks
a = 500 m/s
2
Surrounding air temperature rating 70 °C
Suitable for pollution degree 2
Operating conditions
Max. output current 250 mA
Charging fail threshold Adjustable
D+
Measurement inputs 3ph-n Gen voltage , 3ph-n Mains
Measurement range
10-277 V AC / 10-480 V AC (EU)
10-346 V AC / 10-600 V AC
(US/Canada)
Linear measurement
and protection range
350 V AC Ph-N
660 V AC Ph-Ph
Accuracy
1 %
Frequency range 30-70 Hz (accuracy 0.1 Hz)
Input impedance
0.72 MΩ ph-ph , 0.36 MΩ ph-n
Voltage measurement
Isolation Isolated
Type max ±10 VDC
Voltage regulator output
Isolation Non-isolated
Output Type
±10 VDC or 5 V @ 500 Hz,
PWM selectable by jumper
Speed governor output
Type Build-in monochromatic 3.2"
Resolution 132 × 64 px
Display
USB Device Non-isolated type B connector
USB Host
Non-isolated type A connector
CAN 1
Non-isolated, 250 / 50 kbps,
Terminator impedance 120 Ω
Communications
Measurement inputs 3ph Gen current
Measurement range 5 A
Max. allowed current 10 A
Accuracy ±20 mA for 0-2 A; 1 % of value for 2-5 A
Input impedance <0.1 Ω
Current measurement
Dedicated terminal for safe E-Stop input.
Physical supply for binary outputs 1 & 2.
E-Stop
Number 6
Close/Open indication
0-2 VDC close contact
6-36 VDC open contact
Binary inputs
Number 6
Max. current
BO1,2=5 A (60 °C); BO1,2=4 A (70 °C),
BO3-6=0.5 A
Switching to positive supply terminal
Binary outputs
Number 3, switchable (R/U/I)
Range R = 0-2500 Ω; U = 0-10 V; I = 0-20 mA
Accuracy
R: ±2 % from value ±5 Ω in range 0-250 Ω
R: ±4 % from value in range 250 Ω-2500 Ω
U: 1 % from value ±100 mV
I: 1 % from value ±0.2 mA
Analog inputs
Max. current 45 mA
+5 V Power supply output
Voltage input
range
4 Vpk-pk to 50 Vpk-pk in range 4 Hz to 1 kHz
6 Vpk-pk to 50 Vpk-pk in range 1 to 5 kHz
10 Vpk-pk to 50 Vpk-pk in range 5 to 10 kHz
Frequency input
range
4 Hz to 10 kHz
Frequency
measurement
tolerance
0.2 % from measured value
Magnetic pickup
6
back to Table of contents
InteliLite4 AMF20 Global Guide
198