ID-Mobile Global Guide
251
Analog switch (Multiplexer)
Symbol
Inputs
Input
Type
Range[DIM]
Function
Input 1
A
Any
Input value 1
Input 2
A
Same as 'Input
1'
Input value 2
Input SW
B
N/A
Switch input
Outputs
Output
Type
Range[DIM]
Function
Output
A
Same as 'Input
1'
Copy of 'Input 1' or 'Input 2'
depending of the 'Input SW'
state
Description
The block works as a multiplexer. If the binary input SW is inactive, the block copies the
value of analog input 1 onto the analog output. If the binary input SW is active, the block
copies the value of analog input 2 onto the output.
1. If you want the input 1 to be a constant, write the constant into this box. Otherwise go
back to the sheet, create an input on it and connect the sheet input to the block input
by dragging a wire.
2. If you want the input 2 to be a constant, write the constant into this box. Otherwise go
back to the sheet, create an input on it and connect the sheet input to the block input
by dragging a wire.
