InteliDrive Lite, SW version 1.9
ID-FLX-Lite-1.9r1 Reference Guide.pdf,
©ComAp – August 2015
76
7.3.8 IBLite GateIP
[-]
IP address of gateway for IB-Lite
7.3.9 IBLite DHCP
[DISABLED, ENABLED]
Dynamic Host Configuration Protocol for IP address setting can be used or blocked.
DISABLED:
Block the function of DHCP, this option is worth, if you wanna adjust stable IP address
e.g. for WebServer connection or InteliMonitor PC tool.
H
INT
Can occured collision of IP addresses in local network with devices as printer, router
etc.!
ENABLED:
Dynamically change IP address of the controller after each switch on of the controller.
IP address collision protection. Default state.
7.3.10 ComAp Port
[-]
This sepoint is for adjustment of port for ComAp communication over IB-Lite or IL-NT-GPRS module.
Standard ComAp port is 23, what is default value of this setpoint.
7.3.11 APN Name
[-]
Name of APN access point for GPRS network
H
INT
This information shall provide your telecommunication operator.
7.3.12 APN UserName
[-]
User name for APN access point
H
INT
This information shall provide your telecommunication operator.
7.3.13 APN UserPass
[-]
User password for APN access point
H
INT
This information shall provide your telecommunication operator.
7.3.14 AirGate
[DISABLED, ENABLED]
The option allows or blocks the function of AirGate. For AirGate function is necessary to use
communication plug-in modules IB-Lite or IL-NT-GPRS or InteliDrive Lite partly supports IB-NT too.
DISABLED:
Blocks the function of AIrGate.
ENABLED:
Allows function of AirGate. Default state.
7.3.15 AirGate IP
[-]
AirGate Address. The default address is
„airgate.comap.cz“.
H
INT
