ID-FLX Lite & Telecom Global Guide
190
Related FW
2.5.0
Related applications
Comm object
710
Description
If the input is active, the Speed request =
. The function is affected by
Note:
See
Speed Sel1
Related FW
2.5.0
Related applications
Comm object
711
Description
If the input is active, the
may give the engine speed value for Speed request to
an ECU engine. The Speed Request value may also depend on the conditions which are described in the
chapter below.
Note:
See
Speed Sel2
Related FW
2.5.0
Related applications
Comm object
712
Description
If the input is active, the
may give the engine speed value for Speed request to
an ECU engine. The Speed Request value may also depend on the conditions which are described in the
chapter below.
Note:
= DISABLED, Speed request is adjusted by BI Speed Sel1, 2, 3
edge (button press), i.e. input can be opened and Speed request stay constant.
Note:
= ENABLED, Speed request is adjusted by BI Speed Sel1, 2, 3 level
(switch), i.e. when input is opened Speed request go back to
level.
Note:
SpeedSel1, 2,.3 binary inputs are active only when
= OFF.
Note:
When more binary inputs are active at the same time, e.g. all binary inputs: ‘Speed Sel1’, ‘Speed
Sel2’, ‘Speed Sel3’ then requested speed is given by
(lowest index)
setpoint.
Note:
See
Speed Sel3
Summary of Contents for ID-Lite
