InteliDrive Lite - 1.2.1 Global guide
85
8 Technical data
Power supply range
8-36 V DC
Power supply drop-out immunity
100 ms from min. 10 V return to min. 8 V
Power consumption
40-440 mA depend on supply voltage and temperature
Consumption depends on supply voltage
0.104 A / 8 V DC
0.080 A / 12 V DC
0.051 A / 24 V DC
0.044 A / 30 V DC
0.040 A / 36 V DC
Battery voltage measurement tolerance
2 % at 24 V
Power supply
Note:
For the supply voltage less than 7 V the backlight of the display is switched off. Short-term voltage drops (e.g.
during the engine cranking) do not affect the operation at all.
Operating temperature
-20 ˚C to +70 ˚C
Operating temperature (with LT kit)
-40 ˚C to +70 ˚C
Storage temperature
-30 ˚C to +80 ˚C
Protection degree (front panel)
IP65
Impact protection
EN 62262, EN 50102 (IK04)
Humidity
95% without condensation
Low Voltage Directive
EN 61010-1:95 +A1:97
Electromagnetic Compatibility
EN 50081-1:94, EN 50081-2:96
EN 50082-1:99, EN 50082-2:97
Vibration
5-25 Hz, ±1.6 mm
25-100 Hz, a = 4 g
Shocks
a = 200 m/s
2
Operating conditions
Low Temperature modification
LCD display limits range for controller operating temperature: from -20°C to +70°C, even if the other electronic
components work in wider temperature range.
Internal preheating foil is mounted in InteliDrive Lite LT to extend display operational temperature range.
Preheating starts at temperature below 5°C and preheating power depends on temperature and power supply
voltage.
Preheating foil increases controller current consumption
Controller consumption at
No preheating
Preheating at ambient temperature
0 °C
-20 °C
-40 °C
12 VDC
80 mA
+75 mA
+210 mA
+325 mA
24 VDC
51 mA
+31 mA
+100 mA
+175 mA
Dimensions
180 × 120 × 55 mm
Weight
450 g
Dimensions and weight
