15
DAILY MAINTENANCE
3.
REPLACING THE SQUEEGEE RUBBERS
Check the state of wear and tear of the squeegee rubbers and, if necessary, replace
them. To replace them you must:
1.
Raise the squeegee
2.
Remove the two knobs
3.
Disassemble the squeegee from its support
4.
Remove the tube from the squeegee nozzle so the squeegee can be removed
5.
Unscrew the knobs on the squeegee that block the rubber-pressing blades and
remove them
6.
Remove the rubber-pressing blades
7.
Replace the rubbers
8.
Reassemble everything, carrying out the above-mentioned operations in the reverse
order
4.
DISASSEMBLING THE BRUSH
1.
Raise the squeegee.
2.
Raise the machine by using the handlebars as a lever and position it with the
recovery tank on the ground.
3.
With the base raised, remove the brush manually by rotating it clockwise.
ATTENTION:
Disconnect the power cable from the mains
socket before carrying out any maintenance operations.
ATTENTION:
During this operation, check there are no people
or objects near the brush.