13
MACHINE PREPARATION
5. CONNECTING THE BATTERY CHARGER
The connector is placed in the lower left section (in relation to the
operator). The lower part (1), connected to the batteries, must be inserted
in the upper connector (2), fixed to the cables of the battery charger. The
coupling connector is consigned inside the bag containing this instruction
booklet, and must be assembled on the cables of the battery charger as
indicated in the instructions (see the battery charger manual).
6. RECHARGING THE BATTERIES
In order not to cause permanent damage to the batteries it is essential to
avoid their complete discharge: arrange the recharge within a few minutes
of the switching on of the flashing "discharged batteries" signal.
NOTE
: never leave the batteries completely discharged, even if the
machine is not being used.
When recharging the batteries, keep the
seat base support raised.
After every 20 recharging operations, check
the level of the electrolyte and, if necessary, top up with distilled water.
Danger of exhalation of gas and leakage of corrosive
liquids.
Danger of fire: do not go near with free flames
7. BATTERY CHARGE LEVEL INDICATOR
The battery indicator is digital, with 4 fixed positions and a flashing one.
The numbers which appear on the display show the approximate charge
level.
4
= maximum charge,
3
= 3/4 charge,
2
= 2/4 charge,
1
= 1/4 charge,
0
= discharged batteries (flashing)
A few seconds after the appearance of the flashing “0”,
the brush motor will switch off automatically. With the
remaining charge it is possible to complete the drying
process before starting the recharge.
2
1