12
MACHINE PREPARATION
3. FITTING THE BATTERIES INTO THE MACHINE
The batteries must be housed in the special compartment beneath the operator's seat.
They should be handled using lifting equipment that is suitable in terms of both weight
and hook-up system.
They must also satisfy the requirements of Standard CEI 21-5.
For battery maintenance and daily recharging, you must fully respect
the indications provided by the manufacturer or retailer. All
installation and maintenance operations must be carried out by
specialised personnel.
There are two ways to insert the batteries in their compartment:
the first is to raise the seat base support until the seat is resting against the steering
wheel, then insert the batteries from above, positioning the first one near the side of
the tank. If there are battery-holder cases, insert them from above and position them
next to each other in the compartment
The second way of positioning the batteries is to remove both the detergent tank and
the metal cover, then insert the batteries (or the battery-holder cases) from the side of
the machine
4. CONNECTING THE BATTERY CONNECTOR
The battery connector (1) is placed in the lower left section (in relation to the operator),
and must be connected to the machine connector (2).
This process must be carried out by qualified personnel. The
incorrect or imperfect connection of the cables to the connector can
cause serious harm to people and damage to objects.
2
1