9
MACHINE PREPARATION
1.
HANDLING OF THE PACKED MACHINE
The machine is contained in specific packaging.
It is not possible to place more than two packages on top of each other.
The overall dimensions of the package are:
MEDIA 65BT
MEDIA 75BT
MEDIA 60BS
A 1230 1230 1230
B 740 960 740
C 1490 1690 1490
A
C
B
2.
HOW TO UNPACK THE MACHINE
1.
Remove the outer package.
2.
Release the parking brake by removing the blocking pin (1).
3.
The machine is fixed to the pallet with wedges which block the wheels.
4.
Remove these wedges.
4.
Use a chute to get the machine down from the pallet, pushing it backwards. Do not assemble the
rear squeegee before unloading the machine, and avoid violently jolting the brush head. To
assemble the squeegee, read the “ASSEMBLING THE SQUEEGEE” paragraph.
5.
Keep the pallet for any future transport needs.
ATTENTION: if the product is delivered in cardboard containers, handle the
packed product with suitable lifting means that comply with the legal
requirements.
3.
HOW TO MOVE THE MACHINE
1.
To safely move the machine, you should use a pallet to support it (positioning wooden wedges to
block the wheels, as shown in the previous paragraph).
2.
Lower the squeegee (1) by means of the lever or the key (AU version).
3.
Use the lever or key (AU version) to lower the brush head (2) until the brushes are resting on the
floor.
4.
Pull the brake lever (3) and block the machine using the pin (4).
1
1
2
3
4