23
WORK
8.
Release the lever (3) and lower the brush head. In the case of an automatic machine, lower the key
(7).
9.
Lower the squeegee, rotating the lever (4) anticlockwise. If the machine is automatic, use the key (5);
when you have turned it as far as it will go, the suction motor will switch on. To switch off the suction
motor, turn the key to position “0” once the work is finished.
10.
Check the brake (6) is off.
11.
Turn the speed control knob (8) to set the working speed. If the speed is inadequate, the adjustment
knob can be turned even with the machine in motion.
12.
Press the dead man's levers (7) to activate the brushes; the machine will begin to move. During the
first metres, check there is sufficient solution and that the squeegee dries perfectly.
13.
The machine will now begin to work efficiently until the battery is flat or the detergent solution finishes.
2 . OVERFLOW
DEVICE
The machine is fitted with a float which intervenes when the recovery tank is full, causing the suction tube
to close. In this case, it is necessary to empty the recovery tank, removing the cap of the rear drainage
hose.
ATTENTION: this operation must be carried out using gloves to protect against
contact with dangerous solutions
7
3
4
6
5
7
8