14
MACHINE PREPARATION
11. BATTERY
INDICATOR
On the instrument panel of the machine there is a monitor (1) indicating (amongst other things) the
battery charge status. If the upper line contains 8 light indicators, the battery charge level is 100%. If
the edges of the indicators are flashing, this means the batteries are run down.
ATTENTION: a few seconds after the last indicator on the monitor has flashed,
the brush motor will automatically switch off. With the remaining charge it is
possible to complete the drying process before recharging
12. INSTRUMENT PANEL COMPONENTS
The instrument panel components are identified as follows:
1.
Levers to activate brushes/traction (located beneath the grip)
2.
Water outlet regulation switch (CDS versions)
3.
Detergent outlet regulation switch (CDS versions)
4.
Automatic squeegee command lever (automatic version)
5.
Automatic brush head command lever (automatic version)
6.
Battery level / hour meter display
7.
Battery level hour-counter display command button
8.
Speed level key
13. REAR
COMPONENTS
The rear components are identified as follows:
1.
Discharge pipe with recovery tank cap
2.
Tank closure hinges
3.
Handlebar fastening screws
4.
Lever to raise the squeegee (manual version only)
5.
Battery charge socket cover (available in the BC version only)
6.
Brake lever
7.
Key switch and circuit breakers
8.
Brush lifting pedal
9.
Water level tube
10.
Solution filter
11.
Solution tank drainage cap
14. SIDE
COMPONENTS
The side components are identified as follows:
1.
Solution water filler cap
2.
Recovery tank lifting handle
3.
Suction unit lifting handle
1
8
7
9
5
6
2
1
3
1
2
3
1
4
5
7
3
6
2
9
11
10
8