61
EXTRAORDINARY MAINTENANCE
6.
Turn the knob (5) anticlockwise and open the right hatch
7.
Using the proper equipment, remove the nuts (6) that fix the side rubber-pressing blade (7)
8.
Remove the rubber-pressing blade (7)
9.
Remove the more rigid worn side flap and insert the new one so that there are twenty millimetres
between the work surface and the rubber
10.
Remove the worn side flap (8) and insert the new one so that there are three millimetres between the
work surface and the rubber
11.
Insert the rubber-pressing blade (7)
12.
Using the proper equipment, fix the nuts (6) that fix the side rubber-pressing blade (7)
64.
REPLACEMENT OF HEADLIGHT BULB
To replace a headlight bulb,do as follows
1.
Engage the parking brake, pressing the pedal (1)
2.
Check the main machine switch is in the “OFF-0” position. If this is not the case, turn the key by a
quarter rotation to the left.
3.
Remove the rotation lock of the front cover
4.
Using the slot (2) turn the front cover as far as it will go
WARNING:
This operation must be carried out using gloves to protect against
contact with dangerous solutions.
5.
Block the rotation of the front cover, insert the pin (3) into the slot (4)
5
7
6
8
1
2
3
4