50
WEEKLY MAINTENANCE
6.
Turn the knob (5) anticlockwise and open the right hatch
7.
Release the hinge (6) fixing the articulated arm (7) of the central brush
8.
Remove the articulated arm (7) of the central brush from the arm (8) controlling the central brush
ATTENTION:
This operation must be carried out using gloves to protect
against contact with dangerous substances.
9.
Remove the articulated arm (7) of the central brush from the central brush (9)
10.
Remove the central brush (9)
ATTENTION:
This operation must be carried out using gloves to protect
against contact with dangerous substances.
11.
Using the proper equipment loosen the screws (10) that fix the rear flap support (11) to the frame of
the machine
12.
Adjust the rear flap support (11) so that there are three millimetres between the work surface and the rubber
13.
Using the proper equipment tighten the screws (10) that fix the rear flap support (11) to the frame of
the machine
If this adjustment is insufficient, repeat everything up to point ten, then do as follows:
1.
Using the proper equipment remove the screws (10) that fix the rear flap support (11) to the frame of
the machine
2.
Remove the rear flap support from the machine
5
6
7
8
9
7
10
11
10
11