33
WORK
The display (3) shows the state of the charge of the batteries, when the batteries supplied with the
machine are full the column composed of luminous notches arrives at the green zone of the scale printed
on the instrument panel. As the batteries gradually run down, the notches go out and, with the batteries
completely run down (red zone), the notches start to flash and an intermittent buzzer starts to sound. The
flashing hourglass symbol indicates that the hour meter is counting the time the machine is operating.
38.
STARTING TO WORK
To start working, do as follows:
1.
Open the hopper hatch, pulling the lever (1) down. As soon as the debris hopper hatch is open, the
indicator light (2) on the instrument panel will come on.
ATTENTION!
If along the machine's path there are large pieces of waste, shut the
hatch temporarily to allow the central brush to access and collect it
2.
Lower the central brush, using the lever (3) on the control panel
WARNING
: The central brush will start to rotate as soon as it reaches its work position.
3.
Start the vacuum, turn the lever (4) left
ATTENTION!
When working on a wet area or if wet dirt is being collected, the
vacuum motor should be switched off by turning the lever (6) to the right, and once
the critical zone has passed the vacuum motor can be started again.
4.
Press the accelerator pedal (5) to start moving the machine
ATTENTION:
Adjust the working speed according to the amount of waste and
debris to be collected
To make a reverse manoeuvre, push the accelerator pedal (6) downwards, the machine will begin to
move backwards.
WARNING!
The reverse speed is lower than the forward speed to comply with
current health and safety standards.
3
4
1
2
5
6