4
On delivery of the machine
When the machine is delivered to the customer, an
immediate check must be performed to censure all the
material mentioned in the shipping documents have
been received and also to check that the machine has
not suffered any damage during transportation. If
damage has occurred, get the shipping agent to verify
immediately the amount and nature of the damage
suffered and at the same time inform our claim
department. It is only by prompt action of this type that
compensation for damage may be successfully claimed.
Introduction
Any machine can only work efficiently when it is used
correctly and it is maintained in full, efficient working
order. We therefore encourage you to read this
instruction manual thoroughly and to always refer to it
first if any difficulties arise while using the machine. In
addition we would inform you that our customer service
department (in co-operation with our agents/distributors)
is always at your complete disposal to answer any
queries.
Data for identification
For technical service or when requesting spare parts,
always state the model, the version and the serial
number. These can be found on the serial plate.
TECHNICAL DATA
CS60 is a ride-on sweeping machine. The “B” model is an electrically operated machine powered by traction
batteries, used for cleaning internal or external hard floor surfaces, eg tile, concrete or asphalt.
This machine is designed to be operated on dry surfaces, however if it is used on wet surfaces the suction must
be kept closed. The machine is characterized by a self-levelling main brush for wide-area sweeping, a side brush
for corner, edge and perimeter cleaning and a vacuum suction system with filter to prevent dust being exhausted.
A large hopper is provided for collection of the swept material which is manually emptied using the mechanical
dumping system.
TECHNICAL DATA
U/M
CS 60 II
Working width excluding side brush
mm 600
Working capacity
m
2
/h 2700
Max gradient
% 10%
Dimensions of the central broom
mm 600x265
Dirt hopper volume
l 50
Electric traction motor power
V/W 24/250
Electric brush motor power
V/W 24/600
Filter surface area
m
2
3,2
Type of drive
aut.
Forward speed
km/h 0
4,5
Machine lenght
mm 1250
Machine height
mm 1200
Machine width
mm 750
Traction battery set
V/Ah 24/140
Battery weight
kg 70
Machine weight (without batteries)
kg 150
Noise level (IEC 704/1)
dB (A)
72
Hand vibration level
m/s
2
1,86
Body vibration level
m/s
2
0,23