Page 12 of 39
INSTRUCTION MANUAL
SECT IO N 3
-
PRODUCT INFORMATION
Rev050321
CLEM 6146 EM Clamp
Frequency Range
150 kHz to 230 MHz
Extended Frequency Range
10 kHz to 1 GHz
Nominal Impedance
50
Ω
Input Connector
Type-N
(female)
Clamp Opening Diameter
0.79”
(20 mm)
Maximum Cable Diameter
0.75”
(19 mm)
Height of Center of Cable Opening
2.06
”
(52.5 mm)
Distance from either end of Clamp to Ref. Point
0.87”
(22 mm)
Maximum Output Power into 6 dB Attenuator
10 kHz to 100 MHz
100 MHz to 230 MHz
230 MHz to 1 GHz
400 Watts for 15 minutes
400 Watts for 3 minutes
200 Watts for 3 minutes
Dimensions (L) x (W) x (H)
25.6” x 4.9” x 4.9”
(650.2 mm x 124.5 mm x 124.5 mm)
Weight
13 lbs.
(5.9 kg)
All values are typical, unless specified.
All specifications are subject to change without notice.
ADA-515-CLEM and CLEMA-6146 Adapters
Frequency Range
150 kHz to 230 MHz
Nominal Impedance (ADA-515-CLEM only)
100
Ω
Input Connector
4 mm Banana Jack
Output Connector
Type-N
(female)
Minimum Height for 4 mm Rod Jack
0.9
”
(23 mm)
Maximum Height for 4mm Rod Jack
2.2
”
(56 mm)
Distance from either end of Clamp to Ref. Point
0.87”
(22 mm)
Power Rating (ADA-515-CLEM only)
2.5 Watts
(continuous)
ADA-515-CLEM Dimensions (L) x (W) x (H)
4
” x
3.94
” x
3.94
”
(102.4 mm x 100 mm x 100 mm)
CLEMA-6146 Dimensions (L) x (W) x (H)
4.94” x 3.94” x 3.94”
(125.5 mm x 100 mm x 100 mm)
All values are typical, unless specified.
All specifications are subject to change without notice.
Distributed by: Reliant EMC LLC, +1 408 916
‐
5750, [email protected], www.reliantemc.com
