Columbus Travel 600, Operating Manual

Page: 9 / 28

travel 600
9
1.11 Special Risks at the Machine
– Source of Danger
Danger by electricity:
To prevent the risk of electric shock works on the electrical parts of the machine must be
executed by trained specialists. After finishing these works the safety measures have to
be tested.
Danger while working with the machine:
Cables between the machine and supplies (electricity, water) are to be set in a way that
the cable is not squeezed, is not coming into the way of action and does not create a
stumbling-block.
The machine must never be left unattended on the landing of an travelator/escalator or
on the travelator/escalator itself. If the machine gets out of control there is the risk of se-
vere injury.
Danger after switching off the machine:
Works on the electrical parts of the machine must be executed by trained and authorized
specialist.
1.12 Signs and Stickers
Signs and stickers on the travelator/escalator, on the machine and on the accessories have to be fol-
lowed.
All signs and stickers on the machine have to be kept clean.
1.13 How to react in case of emergency

Stop travelator/escalator at once and bring machine to a standstill by press button (1) or use
EMERGENCY SWITCH-OFF (5) on operating panel (9).

Disconnect cable (24) from supply.

Pull machine away from travelator/escalator

Thoroughly test machine and travelator/escalator ( eventually consult specialists)

Remove source of danger

Eventually go back to work after complete fault clearance.