Ci Scanner Service Manual
Page 5 of 8
6. Clean up the area of the
missing Press Paper Block
with a screwdriver, to
remove any uneven
surfaces.
NOTE: If the block is still attached and
is being replaced because of damage,
use the screwdriver to break it off the
Lid Cover Extrusion Sub-A before
cleaning the surface.
7. Use an instant adhesive to
stick the block on, we
recommend Loctite 460, or
something similar that can
be found locally.
8. Apply a small amount of
the adhesive to the Lid
Cover Extrusion Sub-A in
the area that will occupy
the Press Paper Block
