Colorlight Z6 PRO, User Manual

Page: 31 / 36

31
Enter the clip interface of “ HDMI ” or “ DVI×4 ” or “ SDI1 ” or “ SDI2 ”, press the knob/OK to
turn on/off cropping. Set X, Y, width, and height of the input signal by knob then save the data.
6.4.4 Preset Setting
Rotate the knob to select the preset setting, then press the knob/OK to enter submenu
of “ Preset Setting ”.
In the submenu, 16 preset parameters can be saved, and every preset parameter
includes all parameter information of source setup (signal source, PIP, scaling, cropping,
picture adjustment), users can also directly load the saved preset parameter to display the
image according to needs, and don’t need to set up all parameters again.