19
/
23
In the EDID setting submenu of
HDMI1/2/3
or
DVI1
, you can rotate the knob and select
a conventional resolution to save the selected resolution to the sender, or select
Custom
and set the width, height and frame rate, and then select
Save
to save the setting to the
sender.
5.3.3 Cropping Setting
Rotate the knob and select
Cropping Setting
to enter the
Cropping Setting
submenu
.
In the cropping setting submenu of
HDMI1/2/3
or
DVI1
, press the knob/
OK
to turn the
cropping function on or off. If
Enable
is switched on, you can rotate the knob to set the row
starting point
(
X
), column starting point (
Y
), and the width and height of the signal image,
and then select
Save
.
Summary of Contents for X12
Page 1: ...X12 Controller ...
Page 5: ...3 23 3 Appearance Front Panel Back Panel ...
Page 26: ...24 23 ...
