Page
35
of
46
Vulcan Prime
7. Machine Calibration
Print Heads should be calibrated to ensure good printing quality. To perform calibration,
click
on the
Maintenance
Calibration
path and then, as shown below:
Fig 33: Opening the Calibration Wizard
In the above figure, step and bi-direction calibrations are performed simply by providing data in the given fields.
For bi-direction, click on the
Bi-Dir Offset
(Refer to Fig 33) and select the speed for which you want to perform the
calibration. The
Bi-direction Calibration
result is shown in the image below:
From the above image, user needs to select the value of best aligned pattern and feed (by adding or subtracting
in the current value) in the mark field (Refer to Fig 33).
