Page | 31
Verve LED
14. Media Loading
Follow these steps to load the media on the machine:
Follow these steps to load media:
Step 1:
Place the media on the Print Bed.
Step 2:
Switch ON the Print Bed vacuum by pressing the
Bed Vacuum
button available on the front side
of the machine, as shown below:
Fig 31: Turning ON the Bed Vacuum Button
Step 3:
Switch ON the required vacuum chambers by moving the Vacuum Chamber knob, as shown below:
Fig 32: Switch ON the Vacuum Chamber
The classification of Vacuum Chamber on the Print Bed is shown as below:
Fig 33: Classification of Vacuum Chamber on the Print Bed
Step 4:
Set the head height using the
Measure paper width
icon on the Quick Access Toolbar.
Now, the media gets loaded in the machine.
Summary of Contents for VerveLED VLR 2513
Page 1: ......
Page 49: ...Page 48 Verve LED...
