Page | 29
VERVE LED
9. Machine Calibration
Print Heads should be calibrated to ensure good printing quality. To perform calibration,
click
on the
Maintenance
→
Calibration
path and then, as shown below:
Fig 35: Opening the Calibration Wizard
In the above figure, step and bi-direction calibrations are performed simply by providing data in the given
fields. If print head height is altered then user needs to perform bi-direction calibration. For bi-direction,
click on the
Bi-Dir Offset
(Refer to Fig 35) and select the speed for which you want to perform the
calibration. The
Bi-direction Calibration
result is shown in the image below:
From the above image, user needs to select the value of best aligned pattern and feed (by adding or
subtracting in the current value) in the mark field.
Summary of Contents for VERVE
Page 1: ......
Page 40: ...Page 39 VERVE LED...
