Page
35
of
73
VastraJet K2
PRINT HEAD CALIBRATI ON
The Print Head calibration is categorized into the following types:
•
Mechanical Check
: Includes Vertical Check and Angle Check
•
Software Calibration
: Includes Horizontal Calibration and Step Calibration
Let’s
explain the above-mentioned checks and calibration one by one in details.
Note:
Mechanical checks are performed by service engineer, thus these checks and their description are not included
in the user manual.
NOZZLE CHECK
To perform the nozzle check, click on the
Nozzle Check
icon on the
Quick Access Toolbar
as shown below:
Fig 41: Performing the Nozzle Check
Th print of nozzle check gets started. The Nozzle Test print is shown in the image below:
Fig 42: Displaying the Nozzle Check Result
