Page | 19
TXF
In case, the three-pin outlet is not available, then follow the instructions given below:
1.
Use the plug adapter that comes with the product.
2.
Attach the adapter to the three-pin plug first, then plug the adapter to the two-pin outlet.
3.
Always earth the outlet with the plug adapter.
Turning the Power ON/OFF (Conveyor Belt)
Note:
Wait at least for 15 seconds to restart the machine and also make sure that the AC adapter is
connect to the machine and the power outlet.
Turn ON the Machine
Turn the Main Power knob located on the right side at the back of the machine to "
On
" position, as shown below:
Fig 6: Turning ON the Machine
Turn OFF the Machine
Turn the Main Power knob located on the right side at the back of the machine to "OFF" position, as
shown below:
Fig 7: Turning OFF the Machine
