Page
17
of
39
SubliXpress Plus
Loading Media
Follow these steps to load media:
Step 1:
Unwind the media roll and insert into the supply roller.
Step 2:
Pass the media through dancing roller and guiding rollers (Refer to Fig 16).
Step 3:
Pull out enough media from the supply roller to the print bed (Roller no 5 in Fig 16).
Step 4:
After this, pass the media through guiding rollers and dancing. Finally, paste it on the take up roller, as
shown in the image below:
Fig 16: Showing the Media Path
Note:
Media on the take-up must be perfectly aligned according to the supply roller
’
s media.
