Page
32
of
42
SoniQ HQ Plus
Ripping and Printing
Ripping is an independent process which converts a raw image file into the machine-readable format and get the
file ready for printing. The Rip software supports the pdf, tiff, jpeg, eps, psd, bmp file formats. After ripping the
image file, the output file will be in
“.prt”
or
“.prn”
file format. Thus, you should first rip the image file before
printing and then issue the Print command. While ripping, the color profiles are used to automatically perform
the color corrections in the image. Now, you can print an image on the selected media simply by clicking on the
Print Job
button available on the
Quick Access Toolbar,
as shown below:
Fig 42: Issuing the Print Job Command
After issuing the Print command, the printing gets started and its progress details displays in the Job Information
area, as shown below:
Fig 43: Displaying the Printing Details
DPI and Print Mode
Table 3: Displaying the DPI and Print Mode
Print Mode
DPI
Passes
Mode 1
720 x 720
2
Mode 2
720 x 1080
3
Mode 3
720 x 1440
4
Mode 4
720 x 1080
6
Mode 5
720 x 1440
8