![Colorjet IRISJET PRO User Manual Download Page 28](http://html1.mh-extra.com/html/colorjet/irisjet-pro/irisjet-pro_user-manual_2637908028.webp)
Page | 27
IRISJET PRO
Follow these steps to perform step calibration:
Step 1:
Select the desired pass from the list and click on the
button (Refer to Fig 30).
Step 2:
Feed the correction value in the
Revise
field (the correction value up to two decimal places) (Refer
to Fig 30).
Step 3:
Click on the
=>
icon (Refer to Fig 30) on the Step Calibration window. The correction value result
will be reflected in the
Step
field (Refer to Fig 30). The same step value will also be displayed in the
Steps
field on the
Quick Access Toolbar
.
Setting Print Origin
Print origin sets the print starting point with right most print head position as the reference point. It can
be set by two ways; moving and positioning the carriage and typing the offset value directly in the given
field.
Follow these steps to change the print origin:
Step 1
:
Move
the carriage at the position from where you want to start the printing by
clicking
on the left
and right buttons on the
Quick Access Toolbar
, as shown below:
Fig 31: Adjusting the Carriage Position
Step 2
: After positioning the carriage,
click
on the
Set print origin
icon on the
Quick Access Toolbar
, as
shown below:
Fig 32: Selecting the Set Print Origin Option
On clicking the
Set print origin
icon, the current position of the carriage gets updated in the
Origin X
text
box, as shown below:
Fig 33: Displaying the Origin Value
Now, the printing origin gets set. Additionally, you can also enter the print origin value manually in the
Origin X field under the Print Parameter section.