Page | 15
IRISJET PRO
7. Getting Ready for Printing
Switch ON Procedure
Follow these steps to switch ON the printer:
Step 1:
Check Waste Bottle.
Step 2:
Check Ink Level.
Step 3:
Maintain the room temperature.
Step 4:
Move the carriage manually away from the home position.
Step 5:
Switch ON the printer from the main power or board.
Step 6:
Load the media.
Step 7:
Perform purging and then, nozzle test.
Now, the printer is ready for printing.
Loading Media
Follow these steps to load the media:
Step 1
: Lift up the Media Lever, as shown below:
Fig 14: Displaying the Media Lever
Step 2
: Unwind the media roll to reach near the platen and hold it.
