14-Pin DMD Ribbon Cable
Figure A
Red LED DMD Assembly
Red LED DMD Power Cable
Carefully remove the translite from the backbox and lower the
speaker panel to the position shown in Fig. A to gain access to
the backbox.
ALL RIGHTS RESERVED - US PATENT 8,773,452 B2 - COPYRIGHT 2017 - COLORDMD DISPLAYS LLC
Installation Instructions
for
SPIKE
-
CHROMA eDP
Be sure to turn
OFF
the power to the pinball machine before
installing the ColorDMD display.
Tools / Parts Required
:
Remove the DMD assembly mounting nuts. Remove the original
DMD assembly from the game and store it in a safe place.
1
2
3
STEP
STEP
STEP
Disconnect the DMD power and ribbon cables from the DMD
(see Fig. A). Completely disconnect the DMD Power Cable from
the game by unplugging the other end in the backbox.
Congratulations on the purchase of a new ColorDMD display. The ColorDMD
will enhance your pinball machine by introducing
color
to the dot matrix
display graphics produced by the game.
Remove the red plastic DMD lens and store it with original DMD.
Carefully install the new ColorDMD Clear DMD Shield.
1/4" Nut Driver
5/16" Nut Driver
Phillips Screwdriver
Clear DMD Shield (sold separately)
Mounting Standoffs Kit (sold separately)
STEP
4
•
!
•
•
•
•
