64-
Appendix A: Maintenance
Note:
If this process proves unsuccessful, you can use Lime-A-Way® in place of rubbing
alcohol in severe cases of corrosion.
Touchpads and Buttons
Make sure all connectors fit snugly into the cable harness. Connectors with broken prongs do not
fit properly. Refer to Figure A-4. Check connector prongs for corrosion and clean or replace
connectors as necessary. Refer to the Touchpad maintenance section in this chapter (page 70),
and to your touchpad manual for detailed care instructions.
Figure A-4 Inspect Touchpad and Button Connectors
Start Systems
Make sure all connectors fit snugly into the cable. Connector prongs that are broken fit loosely.
Refer to Figure A-4. Check connector prongs for corrosion and clean or replace connectors as
necessary. Refer to your Start System user’s manual for detail on its proper maintenance.
Scoreboard
Inspect the scoreboard data cable connectors for corrosion and broken or frayed wires. Clean or
replace as necessary. Consult your scoreboard manual for any maintenance needed.
Printer
Inspect the printer cable connectors for corrosion and broken or bent pins. Clean or replace as
necessary. Consult your printer manual for instructions on caring for your printer.
Proper appearance
of connector
prongs
Broken connector
prongs
Flattened connector
prongs
Summary of Contents for System 6
Page 78: ......
Page 86: ...82 Appendix D Scoreboard Definitions 96x192 Pixel LED Matrix or Video Board...
Page 90: ......
