Colorado time systems System 6 Page 64 User Manual Download

Page: 64 / 93

60-

Reference: Softkeys

Note:

To properly turn off the System 6, be sure to return to the main menu and press

Shut

Down

. Then, turn off the System 6 using the power switch on the back.

Please see the description of the main menu on pages

Error! Bookmark not defined.

and 26 for

more details.

Figure 4-R Misc Softkey Menu

Colors

Function:

Allows you to set the colors for your System 6 screen.

Operation:

Press the appropriate softkey to set the background color, and softkey color.

Pressing Default sets the background to Green and the softkeys to Aqua. Please note that the text
will always be black, so it is wise to choose a somewhat lighter color for the background, and
softkeys.

Create New Meet

allows you to save the current meet and start a new one. When a new meet is

created, all of the results are cleared from the screen and the event, heat and race numbers are all
reset to 1.

Summary of Contents for System 6






























































































Search results

Summary of Contents for System 6

Reviews:

Related manuals for System 6

Brands by name

Popular brands

Colorado time systems System 6, User Manual

Search results

Summary of Contents for System 6

Reviews:

Related manuals for System 6

Brands by name

Popular brands