Colorado time systems System 6, User Manual

Page: 10 / 93

6 Swimming System Hardware Setup
1) To set up a loudspeaker start system, place the start system a safe distance from the pool and
plug in the microphone. Route the loudspeaker cable harness along the edge of the pool and
connect the speaker(s) to the harness, as shown in Figure 2-G
2) Connect the cable from the start system to the start connection on the primary cable harness as
shown in Figure 2-A, or to the start connector on the wall-plate or your in-deck wiring system.
3) If you are using a backup start button, plug it into the connector marked “Backup Start” on the
primary cable harness. Refer to Figure 2-A.
Connect the Finish System
Touchpad Finish
1) Place your touchpads in the water, making sure that they are securely in place on their
brackets.
2) Route the input cable harness(es) along the pool deck as shown in Figure 2-E. Plug the
touchpad connectors into the “Prime” connectors on the primary cable harness as shown in
Figure 2-B. If you have an in-deck system, insert the touchpad plugs into the touchpad
connectors on the deck plates.
3) If you are using backup button(s), insert the backup button A plugs into the button A
connectors on the primary cable harness or the deckplate of an in-deck wiring system as shown
2-B.