www.coloradotime.com
55
2. Insert a cotton swab into the jack and use a plunging motion to clean the jack.
3. Rinse the jack with a damp cloth swab and dry it with a dry swab.
4. Apply a small amount of silicone grease to a clean cotton swab and insert into the jack.
Touchpads and Buttons
Make sure all connectors fit snugly into the cable harness. Connectors with broken prongs do
not fit properly. Refer to Figure A-4. Check connector prongs for corrosion and clean or replace
connectors as necessary. Refer to your touchpad manual for detailed care instructions.
Start Systems
Make sure all connectors fit snugly into the cable. Connector prongs that are broken fit loosely.
Refer to Figure A-4. Check connector prongs for corrosion and clean or replace connectors as
necessary. Refer to your Start System user’s manual for detail on its proper maintenance.
Proper
appearance of
connector prongs
Broken connector
prongs
Flattened connector
prongs
