42
+1 970-667-1000
The touchpads are inactive for a user-defined number of seconds after the start (see page 23).
As soon as the touchpads are ready to receive a touch, “ARMED” will be indicated in the Lane
Data section (see page 14) for each lane. “N: ARMED” indicates near end touchpads are ready,
and “F: ARMED” indicates far end touchpads are ready.
Times Registered
The swimmers have made their turns at the far end of the pool and come in to touch at the near
end. The swimmer in lane 5 touches first. The timer beeps at the touch (see page 19) and the
number of completed lengths for that lane is displayed. The pad status indicator for lane 5 goes
blank and the pad will not accept another touch. The timer beeps as each swimmer touches a
pad.
Missed touch (Using +Touch)
The second swimmer in lane 6 has started but the software does not show that the previous
swimmer touched the pad. In this situation, the number of completed lengths displayed for lane
6 is 0/8.
As sometimes happens, the first swimmer touched the wall beside the pad, which does not
register as a touch.
