www.coloradotime.com
21
Timing
1: Primary Finish
Primary Finish sets whether the system will use touchpads or pushbuttons as the primary mode
to finish a race. The near and far ends can be set independently. If pushbuttons are selected as
the primary mode of finish, you can promote the inputs so that Pad becomes Button A, Button A
becomes Button B and Button B becomes Button C. This will allow a 2 Button finish with a
single cable harness.
2: Default Start End
In the Default Start End
section even and odd length races can be set to accept a start input on
either the near or far end of the pool. Single events can be altered in the
Session
screen if
needed (see page 35).
(1)
(2)
(3)
(4)
(5)
(6)
(7)
(8)
(9)
