32
Chapter 4
C
Important
The SD card is a Linux formatted
SD card. Any other format is
not recognized and a creates
an error.
B
Warning
The SD card is permanently
damaged if it is put in any other
device than a Linux drive. If
this happened all data is lost.
A new Linux formatted SD card
can be ordered via your local
Signify representative.
4.3 Check SD card status
Perform the following steps to check the status of the
SD card:
1 Log in to the administrator page of the Luminous Textile that has the
problem (See the
Commissioning Guide
). In case the password is unknown,
contact the customer. If the customer cannot help, contact the local
Signify representative.
2 Click ‘Luminous Textile info’ and lookup to ‘SD card status’ in the right field.
• On error code (0) and (1) the system is fine.
• On error code (-1), please ensure the card is in correctly. Replace the
card if it was placed in-correctly or place a card if it was missing.
• On all other error codes, go to the ‘app page’, open the ‘service tools’
app and first check, then repair the SD card.
• Reboot the Luminous Textile.
3 If the issue persists, contact the local Signify representative.
Figure 38, Checking status of SD card.
