Shaker
VIBA X.30
Collomix GmbH
D-85080 Gaimersheim
10
Version 1.0-20
5.
Set-up and using the Shaker for the first time
5.1
Content
The Shaker is delivered with the following:
These Operating Instructions
Cover insert made of foam
A rubber band to secure the handles
A power supply cord
5.2
Set-up the equipment
The machine is delivered on a wooden pallet packaged in recyclable cardboard. Check the packaging
immediately upon receipt and the equipment when unwrapping it for any visual external defects.
Keep all parts of the original packaging for a possible necessary return.
The machine shall be operated only by qualified personnel using suitable lifting equipment eg. a
forklift truck to be lifted from the palette. Only move the fork in from the front or back to avoid
damaging the transport rollers.
Pay attention to the weight of the machine specified in
not to exceed the permissible load of
the floor.
Do not operate the machine on the shipping pallet or on any other unsuitable sub-surfaces.
When setting up, make sure there is enough working space in front of the machine. The opened
machine door must not protrude into corridors or walkways!
In general, the machine does not need any fine adjustment because of its 3 legs. If necessary, you
can adjust any unevenness in the floor with the height-adjustable legs.
To protect the mixing unit from damages during transport, it is secured with a lashing belt, which
goes over the mixing unit. The belt must be removed prior to switching on the machine:
To release, pull the slider and move the lever by approx. 180°
to the stop.
The pre-tensioning force is released immediately.
The strap is hooked into the
attachment points in the
machine.
5.3
Mains connection
Pay attention on proper protection of the electrical circuit such as described under
Type B residual-current devices (RCD).
Place the mains cable in a way to prevent from stumbling or snagging.
Machine legs
Transport lock
with lashing belt
