Collomix GmbH
ROTA X.40
Version 1.1-20
17
8.3
Repair
If service is required, please consult the customer service or the manufacturer of the machine.
DANGER
Danger of death by dangerous voltage
Do not open the housing or remove any safety equipment of the machine. Please note that all
maintenance and servicing jobs must be left strictly to authorized and suitably trained expert staff.
The proper state of all safety equipment and electrical equipment is to verify and document after
the repair.
Only use original spare parts.
Do not modify or change safety-related parts!
Any additional components added may not impair safety and must be approved by the
manufacturer.
8.4
Consumables
The following parts are available for the device:
Part
Article no.:
Rubber for the handle fixation
62878
Mobilux© EP2 grease 150 g
61299
Spare parts are available under www.collomix.de.
9.
Storage, disposal
9.1
Storage
The storage area should be cool and dry in order to prevent corrosion on the individual parts of the
machine.
The room temperature of the storage area must be constantly above freezing.
Package the device to prevent any damages through outside impacts during storage.
If necessary, use cardboard and other packaging material.
Secure the machine against unintentional tilting and instability.
9.2
Disposal
The transport package is made of recyclable material. Please dispose this material accordingly.
At the end of the useful life, the machine must be properly disposed to return the used raw materials
to the recycling loop. Please contact the manufacturer directly for any questions concerning disposal.
